How To Remove A Stuck Oil Drain Plug?

How To Remove A Stuck Oil Drain Plug?

How To Remove A Stuck Oil Drain Plug?

It is necessary to spray penetrating oil onto the plug and allow it to remain for a while. You can then use the Hammer with a small size and tap counterclockwise, making sure that you’re loosening the plug.

What Is An Oil Drain Plug?

Motor oil is circulated the vehicle via an oil pump. It helps lubricate the engine, ensuring everything is running efficiently.

It’s kept in the oil sump, a fairly massive metal container bolted on the top of the motor. The sump is slightly different in certain cars, including racecars and motorbikes.

An oil drain plug is at the sump’s bottom. It’s designed to permit mechanics to remove the oil. Gravity will do the rest.

When the oil flow ceases, the mechanic will reinstall/tighten the drain plug for oil with an entirely new washer. The ramp is then lowered to allow oil to flow in the back of the engine starting from the top.

Different Types Of Oil Drain Plugs

Some companies place drain plugs for oil onto the bottom of the sump. Others place them outwards towards the bottom of one side (usually the front or back).

Different cars are available in various kinds, as well. For example, the oil drain plugs that protrude are typically standard hex bolts. They can be removed with normal ratchets, sockets, and spanners.

Some cars have drain plugs that require a Torx square, a square, or Hex bit to remove it. For the most part, the plug that drains oil is completely removed. However, in some cars, the plugs only loosen to a certain degree. The oil then gets to drain without having to drain it completely.

If you cannot loosen the plug, be sure that it’s not any of them! Look in the owner’s manual or watch the YouTube video.

Why Does An Oil Drain Plug Get Stuck?Pexels Daniel Andraski 13065690

It’s not a common occurrence that an oil drain pipe becomes stuck. The drain plug for oil shouldn’t be stuck if the vehicle is regularly maintained in most cases, at the very least.

The most likely cause for the plug getting stuck is that the edges have been rounded off. This is most likely the case when it was first replaced.

Additionally, rust may enter from the outside, which means the drain plug for oil won’t be able to come out.

Another (incredibly annoying!) reason oil drain plugs get stuck is when DIYers and technicians overtighten the plugs too much. The plug should be tightened according to the torque in the owner’s manual. More than that is not enough.

And even more disturbingly, you may notice that someone has applied Loctite Threadlocker. Why?!

Then, the buildup of sludge within the sump may cause a bolt’s seize up. Old motor oil will eventually turn into sludge, increasing pressure on the oil. This clogs everything in the engine, preventing it from operating. If the sludge can get into the thread of the oil drain plug, it may become hard and stop it from moving.

Possible Reasons To Stuck Oil Drain Plug

The most common reason the drain plug for oil gets stuck is because of sludge formation. The formation of sludge around the oil drain plug is difficult to remove by the standard method. The sludge builds up within the drain pipe because the engine’s oil has surpassed its change-over time. The oil is then prone to become oxidized at high temperatures. In the process of oxidation, the molecules of engine oil are broken into pieces. The oil’s molecules interact with dirt from combustion, comprising metallic particles, carbon fuel, and water, creating an impervious sludge.

Another reason that could cause the drain plug for oil to get stuck is tightening too much. This can happen when a non-skilled person performs routine maintenance when you tighten the plug too tightly and damage the screw’s pitch. You must replace the entire oil pan if the plug is too tight. There are also operations in the screw hole to keep the damaged area and replace the drain plug with a new one.

How Do You Remove Blocked Drain Plugs For Oil Step By Step

Pexels Pixabay 279949


Step 1: Warming Up The Car

One of the most straightforward methods to remove a blocked drain plug from oil is to allow the vehicle to warm up. It can be done by letting it sit at a standstill for a while or by taking it on the road briefly. Then you should park the vehicle on a level surface. With any hydraulic jack, lift up the car, locate the drain plug, and attempt to move it counterclockwise or clockwise until it becomes loose.

Step 2: Using A Socket Wrench

The socket wrench is among the well-known tools utilized in the maintenance of vehicles because of its utility and adaptability. It’s also a multi-use tool that can be utilized for various uses. For example, a socket wrench is the most effective tool to loosen the drain plug. First, find the right socket the same size as the dimensions of the drain plug, and then use it to unblock the blocked drain plug. You should consider a socket wrench with an extra long handle because it will give you more torque, simplifying the job.

Step 3: Use A Hammer

If the second step doesn’t work, don’t give up hope. Another option is to employ a hammer to tap the plug draining the oil. Making gentle taps in the right direction and method will allow the plug to loosen. Be cautious not to hurt the plug that drains oil or the teeth. Then, try time to remove the drain plug with a socket wrench.

Step 4: Using Rust Remover / Lubricate

Lubricants are a great choice because they create a magical effect on the stuck object. Rust removers act as solvents for rust and sludge. Spray some onto the oil drain plug and let it work for several minutes of trying to remove the drain plug from the oil using socket wrenches or any other device.

Step 5: Use A Gator Grip

The invention is called a universal wrench socket, which can be used with all kinds of sockets, plugs, and bolts with its teeth. In addition, the gator grip can assist you in removing the plug.

Step 6: Get Professional Help

However, if you’ve come to this point, the previous suggestions and steps failed to remove the plug that drains oil from the original. Do not be afraid to ask for help. It’s not a bad idea to seek help when things get complicated. But, you should be cautious about who you turn to for assistance. You must ensure that you are seeking help from a professional. Also, make sure that the repairs that will be put in place to fix your car are secure. Ask the person to explain what’s going on and why. Removing the suck oil drain plug might require machine-tooling skills to prevent the issue from repeating after fitting the new plug.

Heat Gun

If you’re having difficulty removing the drain plug from your oil, you might be interested in using a heat gun. Although it’s not the most efficient or practical method of getting it out, it’s an extremely safe and efficient.

For the first time, you should warm your car by parking it on a steady surface. Then, allow it to idle for around 10 minutes. This will allow the engine to warm up the oil inside the engine.

The next step is to rotate the plug that drains oil in the right direction. This will allow it to grow and then loosen. However, you should be cautious not to over-tighten the plug. Inadequate tightening could cause it to break. It may also harm the components that make up the block of the cylinder.

Another method to get rid of an oil drain plug that is stuck is using the Hammer and socket wrench. These are the two most commonly utilized tools to repair autos.

While hammers can assist in removing the drain plug, you’ll have to be cautious. It is not advisable to damage or break the plug. Furthermore, the Hammer may cause an enormous volume of petroleum to leak out.

It is also possible to employ a blow dryer to heat the oil. However, avoid damaging the rubber seals around drainage plug holes. Also, don’t apply the hair dryer at high temperatures.

Finally, a socket wrench can be the most effective tool to remove the drain plug for oil. Make sure the tool you purchase is the correct dimension for the bolt. A socket wrench with a longer handle will give you more torque.

The best type of heat gun is one with an electric motor. It will aid in lubricating the bolt’s threads and melt the corrosion. But, again, applying penetrating oil several times per day is essential.

A professional mechanic should have the tools needed to get rid of the plug in your oil. But, if you’re doing it yourself, it is important to take note of the dangers. So use a heat gun safely, and only follow the instructions below.

In the end, speaking with an expert is recommended if you’re uncertain of the best course of action. Then, the local auto body shop can do the task for you.

Socket WrenchPexels Cottonbro Studio 7568433

Numerous methods exist to get rid of a stuck drain plug for oil. To begin, it is to use a socket wrench. But the socket wrench has to be the proper size for the head of the socket. Also, you should be careful to avoid striking your oil pan. Finally, for the design of the plug, you may have to employ a tool with a longer handle.

A ratchet is a good alternative. It will let you apply enough force to remove it from its holder. However, if the drainage plug has been damaged, it might be difficult to remove.

Another option is using the impact wrench. Although this isn’t as efficient as the socket wrench, it can provide additional torque. But, again, be sure to wear gloves to protect your hands.

You could also try the removal of rust. Rust removers are made to remove rust and sludge and can help loosen the plug for oil.

It is also possible to use a flathead screwdriver to make a wedge between the plug and the pan. You can also tap the plug numerous times using a Hammer. With a tap, you’ll remove the corrosion or rust that holds the plug.

Using a gator grip is an alternative to removing the drain plug from an oil tank. A gator grip is a piece of equipment with teeth that assist you in gripping the plug. It’s also great those times when other methods don’t work.

Before beginning an effort to repair a socket be sure to wear gloves. Wearing leather gloves will protect your hands. Also, keep your Hammer in place using your thumb. This will assist you in applying constant force to your plug and reduce the risk of harming your hands.

Don’t forget to wash the oil drain plug using a soft cloth. Once you’ve cleaned and re-sealed it, you can replace it with a new gasket. Make sure to ensure that you tighten the plug according to the manufacturer’s specifications.

Removal of a stuck drain plug is difficult. But, it is possible to accomplish the task. First, make sure to verify the torque and thickness of the plug.

Hammers Are Used To Applying Pressure

If you’ve got a drain plug for your oil, there are myriad methods to help you remove it. Of course, removing it with a hammer and socket wrench is the most effective method. But, before doing this, there are some things to consider.

The first step is to remove the plug. This is the easiest step in the process. Then, using the hydraulic jack to lift the vehicle to get an accurate view of the plug is possible. The next step is to get the ratchet that has a socket with six points.

Another option is to heat the plug. This could help break up the rust and sludge keeping the plug in place. A lubricant may also aid in loosening the plug. But, it is a temporary fix.

After you’ve pulled the plug removed and replaced it, you’ll have for you to replace your oil. Again, if you’re unsure of your abilities to perform this task, it’s best to call an expert to complete it.

It’s not difficult to change the oil, but you must do it with the correct method. Making use of the right tools can help you avoid a lot of hassles. When removing the plug, you must take time and work carefully. Being patient can help to avoid the possibility of causing damage.

In the end, you could use an oxidized remover to remove any corrosion or sludge that may be floating in the vicinity. It can be an efficient method to get the plug out of its shackle.

If you plan on doing this, ensure you’re equipped with the proper tools. Should you not do this, you may damage the engine. However, a few easy steps are needed to help the process go smoothly.

If you do not have the tools to take the plug off, you can use the Gator grip. It is equipped with teeth to remove the plug. Alternatively, you can hit the plug with the Hammer. These techniques are simple to use. However, they’re not always efficient.

Finding a hammer and socket to get rid of an oil drain plug stuck isn’t easy, but it’s not difficult. Ensure you do not miss the most crucial steps of the procedure.

Common Causes Of Stripped Drain Plugs

If a drain plug gets removed, it can be quite inconvenient. The primary cause of this issue was human error. However, there are ways to fix the problem. This includes using the right tools and some brutal force.

It is crucial to know how the drain plug for oil operates. This will allow you to avoid an unclean drain plug. Two kinds of drain plugs come in. The first one is threaded, while the other type is non-threaded.

In certain situations, an unclean plug may be repaired by removing the pan that holds the oil. However, when the oil pan has been damaged, it could require replacing. This can be a costly fix. To prevent this from happening issue, take proper care of your car. For instance, it must be regularly inspected and oiled.

Another reason for a worn plug is tightening too much. The tightening process can cause damage to the threads inside the plug. In addition, excessive tightening could cause damage to the threads in the pan.

One common error people make when fixing the oil tank is using incorrect tools. For example, using a screwdriver with a flat head or vice grips could harm the pot more. So it is suggested to use a socket rather.

A heat gun can aid in losing the plug. It breaks down the bonds of rust and allows the plug to unwind. You may also lubricate your plug using WD-40 to eliminate particles and sludge.

If you are working with any oil-based pan, it’s advised to wear safety equipment. You might need to remove the entire pan to get to the plug. Additionally, improperly sized tools could cause damage to the plug’s head. Make sure to ensure that you are using the correct tool for the job.

If you cannot pull off an oil plug that has been stripped by yourself, you must take the vehicle to an auto-body shop. They will be able to repair the issue and also provide you with the appropriate tools. This way, you can guarantee the longevity of your vehicle.

Oil drain plugs that are ripped can be a huge hassle to handle. In addition, it could cause internal damage to the vehicle or even engine breakdown.


What are the typical causes of an oil drain plug sticking?

Corrosion, excessive tightness, and incorrect lubrication after installation are the three most frequent causes of clogged oil drain plugs.

What equipment do I require to unstick an oil drain plug?

The tools you require are a breaker bar or pipe for added leverage, penetrating oil or lubricant, a wrench or socket that is the right size for the plug, and a hammer.

How can I remove a stubbornly jammed oil drain plug?

You can try using a heat gun or torch to expand the metal surrounding the plug, hammering the plug’s side to remove rust or corrosion, or using a breaker bar or pipe for greater leverage.

Can I unstick an oil drain plug with pliers or vise grips?

A clogged oil drain plug should not be removed using pliers or vice grips as they may cause damage to the plug and exacerbate the issue.

Is it okay to take out a clogged oil drain stopper using an impact wrench?

A clogged oil drain plug might be dangerous to remove using an impact wrench because it could harm the oil pan or the threads on the plug. To remove the clog, it is preferable to use hand tools and penetrating oil.

After attempting each approach, what should I do if the oil drain stopper is still stuck?

A professional mechanic can use specialized equipment to remove the plug without harming the oil pan or plug threads, therefore it may be better to enlist their help if the oil drain stopper is still stuck.