Wireless Earbud Not Turning On – How to Fix It

A mature businesswoman places earbuds in her ears as she prepares to participate in a virtual meeting

Wireless Earbud Not Turning On – How to Fix It

Pull down the phone’s top shade on an Android smartphone, then long-press the Bluetooth icon. It will immediately take you to the Bluetooth menu, where you may enable it and then start looking for devices. To link a set of headphones, tap their name.

Depending on the audio settings on your headset, it could only play in one ear. So make sure the mono option is disabled in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well.

The LED indicator on your wireless earbud may not be turning on. This can happen for a few reasons. One common reason is that the earbud may be damaged internally. If this is the case, the device may need to be resynced or restarted. Other causes include the device being water-damaged or frayed. Fortunately, there are a few easy ways to fix this problem.

RED LED Indicator on Wireless Earbuds not Turning On

If you’re frustrated because the RED LED indicator on your wireless earbuds won’t turn on, there are a couple of things you can do to fix this problem. First, make sure your headphones are charging correctly. The LED indicator will flash red when you put your wireless earbuds in the charging case. When the charging is complete, the LED will turn solid.

The RED LED indicator on wireless earbud batteries is an essential feature for proper charging. In addition to turning, it on, the indicator lights also show the battery level. The charging case contains a micro-USB port for charging. Connect the charging case to a computer or a power bank to charge the earbuds. You can connect the charging case to a car charger or a 12-volt adapter.

If the wireless earbuds are not turning on, try turning them on manually. First, press the button on the earbuds for about two seconds. They should then appear in the Bluetooth Devices list. Then, select the device and follow the prompts.

Wireless Earbud Not Turning On – How to Fix It

Another cause for the red LED indicator on wireless earbuds not working is a connection problem. Make sure you’re connected to the same network as the headphones and try pairing them again. You can also try connecting to a different device if the headphones don’t turn on automatically.

If the RED LED indicator on wireless earbud headphones isn’t turning on, you may need to reset the pairing process. Also, if you have a rechargeable battery, ensure it’s not yet past the 16-hour charge cycle. You may have to contact the manufacturer or service center if the problem persists.

Restarting a Wireless Earbud

To reset a wireless earbud, place it in its charging case and press and hold the button for 10 seconds. When it is done, the indicator light should turn green. Some brands may have different and more complicated procedures. Some Bluetooth headphones will have an indicator light on the case as well.

You can also try to reset your wireless earbud by performing a factory reset. This will reset the device’s settings and clear all previous pairing information. You can do this manually or with the help of the Sony Headphones Connect app. To do this, connect the earbuds to power and place them in the charging case. Next, press and hold the touch sensors for at least 30 seconds. If they blink and don’t work, try the following:

A dedicated button earbud is easier to operate but may be more difficult to reset. For example, you need to hold the button for three seconds, then press the button again. You’ll see a blue light blink when you’re done, and the device should be back in the paired list.

Wireless Earbud Not Turning On – How to Fix It

Restarting a wireless earbud should work for the Jabra Tarah headphones. To do this, you must be within three feet of the device to start the process. Once you’ve done that, press the power button and hold it for a few seconds. You’ll notice that the blue LED starts blinking white and red, and the pairing mode should be restored.

When performing this reset, ensure you don’t forget to remove the previous pairing the earbuds had with the device. In most cases, the earbuds will retain the pairing information, so it’s best to do this a few times before deleting the previous pairing. If this method doesn’t work, repeat the process to see if you can pair the device correctly.

Internal Damage Caused by a Faulty Wireless Earbud

A faulty wireless earbud can cause your music to stop playing. In addition, moisture damage can shorten the internal electronic components, causing the unit to stop working. To prevent this, don’t use your earbuds while walking in the rain or operating your computer in a humid environment.

Fortunately, you can fix water-damaged Bluetooth earbuds. The first thing you need to do is to drain excess water from the device. To do this, you’ll need to shake it. Next, fill a glass with de-ionized or distilled water.

Sometimes, the problem is not with the headphones but with the cords. You may need to apply electrical tape to the wire to stay in place. While this isn’t a permanent solution, it’s an easy and inexpensive way to fix your headphones.

Another common cause of internal damage is improper use of the earbud. People often pull out their earphones while in use, which stresses the connection points excessively. This stress leads to metal fatigue and stress fractures. Unfortunately, this can also affect the sound quality of the earphones. Luckily, there’s a solution to this problem: earphone cases. Besides protecting the cords, earphone cases also shield sensitive electronic components.

Avoid using wireless earbuds in extreme temperatures. Extreme temperatures can damage the batteries of the headphones. In addition, if the wireless earbuds get wet, they can even lose their charge and be rendered useless. To prevent such an issue, keep them out of direct sunlight and away from moisture and sand.

Charge your wireless earbuds regularly to keep them in good condition. If the charging port becomes dirty, clean it with a clean cloth. During this process, clean out any lint or dust that may have accumulated on the earbuds.

A faulty wireless earbud can cause severe damage to your ears. If you have any questions, consult your doctor. Even if you do not experience any symptoms, you should take action and return your earbuds if you think they are faulty. You may be able to get a refund or medical coverage from the manufacturer.

Resyncing a Wireless Earbud

If your wireless earbuds are not turning on, you might be experiencing a Bluetooth pairing problem. Sometimes this is an easy fix and can be solved by simply cleaning the device or resetting it. However, other problems are more complex and require more detailed troubleshooting.

The first step is to check the battery level. Ensure that both earbuds are connected to the device and at least 50% charged. The earbuds may not be adequately synced if the batteries are lower than 50%.

If the buds are not paired, you can try resetting them by removing them from their charging case and pressing their respective buttons. The Bluetooth indicator should flash red/blue when the earbuds are correctly synced. You can then reconnect them to your device by following the steps above.

If the earbuds constantly pop out of your ears, the most likely cause is improper fit. A good fit is essential for both comfort and sound isolation. Changing the ear tips may be the best solution. A second solution is to purchase new earbuds.

In case the earbuds are not connected to the charging case, you may need to try another USB-C cable or use another power adapter. If these steps don’t work, try a factory reset. If the problem persists, contact Sony customer service for assistance.